Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Niwot, CO
We provide independent Lennox service across Niwot, and the thing that sets our Lennox work here apart is containment: we run Nikro HEPA vacuums and Abatement Technologies negative-air equipment so the loess silt that collects inside Lennox cabinets in Niwot ends up in a filter, not in your living room. Your Lennox furnace, air handler, or Healthy Climate accessory deserves a crew that knows how it’s built and what it takes to clean it without disturbing factory-sealed parts. Call (888) 495-2236 for a free estimate.
Why Niwot Residents Choose Us for Lennox Service
Lennox equipment has specifics. The cabinet panels, the blower access, the plenum transitions, the condensate routing on high-efficiency models: all of it shapes how a cleaning has to be approached. We work on Lennox systems regularly, and we clean and seal ductwork behind everything from older G-series furnaces to modern variable-speed systems across Niwot’s mixed housing stock.
We also know what Niwot does to those systems. Dry, gusty summers push fine silt into returns, and the winter heating season recirculates dust from wood stoves through the same pathways. A Lennox setup in Niwot sees both of those pressures, sometimes in the same year.
Scheduling is straightforward. We answer 24/7, dispatch runs 7am to 7pm Sunday through Friday, and the price is agreed on the written estimate before work starts. No per-vent pricing, no bait-and-switch coupon arithmetic. We also repair what we find, so a damaged trunk seam or failed mastic doesn’t turn into a second appointment.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Niwot
- Loess silt pulled into high-efficiency cabinets. Lennox high-efficiency furnaces with secondary heat exchangers and condensate traps can draw fine dust into the cabinet during windy Niwot summers, coating the blower wheel and evaporator coil. Left alone, that coating cuts airflow and strains the blower.
- Seam leaks in original galvanized plenums. Older Lennox galvanized plenums and original sheet-metal trunks, common in mid-century Niwot ranchers, develop seam leaks that let dust and wood-stove ash migrate into return ducts through the heating season. Sealing the accessible joints stops the migration at the source.
- Restricted return airflow on variable-speed air handlers. Lennox CBX series air handlers are sensitive to restricted return airflow. Silt-loaded filters and undersized returns cause pressure problems and coil icing, which is why we check return sizing and filter condition before cleaning anything.
- Clogged Healthy Climate HRV/ERV cores and filters. Lennox Healthy Climate HRV and ERV cores clog quickly in Niwot’s semi-arid climate, reducing ventilation effectiveness and recirculating fine particles. Clearing them restores the balance the system was set up for.
- Retrofitted chases that hide surprises. Historic downtown homes sometimes have Lennox equipment tucked into wall cavities or under-floor chases where old duct material sits out of sight. Video inspection comes first on these jobs for a reason.
Lennox Service in Niwot: What Local Conditions Mean for Your Equipment
Niwot’s high-altitude, semi-arid climate with gusty winds and dusty summers loads ducts with fine silt, and the loess dust off the exposed Table Mesa and Front Range winds is the persistent driver. For Lennox owners this matters in a specific way: modern Lennox cabinets are tight, and a tight cabinet doesn’t let silt pass harmlessly through. It collects at the plenum transition, on the blower wheel, and against the coil face. Add a winter heating season that recirculates wood-stove ash through the same returns and you get a system that looks fine from the outside while its airflow quietly drops.
Historic downtown Niwot homes make this harder. Furnaces and air handlers there are often retrofitted into tight wall cavities or under-floor chases, so video inspection is typically needed before any cleaning tool can be safely run through those transitions. Mid-century homes add another variable: watch for old transite duct material, which requires special handling rather than a rotary brush. We approach all of it with HEPA-rated containment so the debris comes out of the house instead of settling back into it.
Lennox Models & Products We Service in Niwot
We service Lennox high-efficiency and Merit Series furnaces, CBX and CBXH air handlers paired with XC and XP outdoor units, and Lennox Healthy Climate filtration and HRV/ERV systems. We clean the ductwork those systems connect to, and we offer Lennox-compatible service that respects how each piece was engineered.
Where fit and pressure drop matter, we use OEM Lennox filters, gaskets, and Healthy Climate media. For generic flex duct, mastic, and hardware, quality aftermarket parts do the job well. We’re an independent shop, not affiliated with or authorized by Lennox, and we don’t claim otherwise. We repair, install, and service Lennox equipment with parts that fit it. That’s the whole position.
A typical mid-century Niwot rancher with a Lennox Merit Series furnace and original galvanized trunk lines often shows reduced airflow and dust blow-off at registers after a windy spring. A qualified technician typically video-inspects the returns, finds loess silt packed at the plenum transition and failed mastic at trunk seams, then cleans the blower and coil and seals the accessible joints rather than replacing the duct system outright.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Niwot
Whole-system air duct cleaning is quoted per job, not per vent, and the written estimate sets the final price. What drives the number: the size and layout of the system, how much silt has accumulated, whether access is straightforward or requires working around retrofitted chases, and whether repair work like duct sealing is needed alongside the cleaning.
| Service | Typical Estimated Range |
|---|---|
| Whole-home air duct cleaning | Quoted per system on the written estimate |
| Dryer vent cleaning | Quoted per job on the written estimate |
| Duct repair and sealing | Quoted per job on the written estimate |
| Video inspection | Included in the estimate for the job |
Every estimate is free, and it comes with a clear scope: what we’ll clean, what we’ll seal, and what we’ll leave alone because it’s sound. For a Niwot home with a Lennox system and a mix of original and retrofitted ductwork, that scope is the honest part of the conversation. Call (888) 495-2236 and we’ll get you a number.
Serving Niwot, CO – Our Local Coverage Area
We serve Niwot and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Niwot
Because the dust isn’t coming from the filter, it’s coming from the ducts and the cabinet surfaces downstream. Loess silt packs at plenum transitions and along trunk seams in Niwot’s windy summers, and a fresh filter only catches what reaches it. Cleaning the system and sealing the leaks addresses the source. Call (888) 495-2236 for an exact quote; estimates are free.
Yes, with the right approach. Crawlspace installations with older ductwork need video inspection first to map transitions, and cleaning tools are run at controlled speed through those sections. Where duct material is fragile or transite-era, we handle it differently rather than forcing a brush through. Call (888) 495-2236 and we’ll talk through your setup.
It usually does. Dry dust clogs HRV and ERV cores and filters faster in Niwot’s semi-arid conditions, which cuts ventilation effectiveness and pushes fine particles back into the living space. Cleaning the cores and the connected duct runs restores the balance. Call (888) 495-2236 for a quote on your system.
Flex duct can often be cleaned when it’s properly supported and not collapsed. We inspect it first, because crushed or sagging runs restrict airflow regardless of how clean they are. If a section is damaged beyond cleaning, we can repair or replace it in the same visit. Call (888) 495-2236 to set up an inspection.
Watch for reduced airflow at registers, dust blow-off after windy stretches, and visible seam separation on galvanized trunks. Those original sheet-metal runs often develop leaks at the joints, and wood-stove ash migrates through them in winter. Call (888) 495-2236 for an exact quote; estimates are free.
Service Areas Near Niwot
We work across Niwot and the surrounding communities, including Thornton, Dacono, Platteville, Northglenn, Federal Heights, and Broomfield. If you’re near any of these and have a Lennox system that needs cleaning, sealing, or a dryer vent cleared, we can schedule it. The equipment and the approach don’t change by address.
Book Your Lennox Service in Niwot Today
If your Lennox system is overdue and the dust keeps coming back, call (888) 495-2236 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Cleaning, repair, and dryer vent service in a single visit, with HEPA-rated containment and a written price agreed before we start.
Written by the team at Duct Cleaning Thornton.